You can attach an external hard drive to a Raspberry Pi and then share music over Sonos. This works very well. Even though my hard drive is connected to the rPI via USB 2.0, the music streams fine, no stutters.
Right now I’m playing Jeff Buckley’s ‘Sketches for My Sweetheart The Drunk’ all over the house. “Vancouver” track is so awesome!
Technically this kind of storage sharing falls under the term Network Attached Storage (NAS). But, that seems like an overblown term for just sharing one disk. There are a lot of features on a full-blown NAS.
How does the RaspberryPI share the storage? By running a server called Samba. This is a set of open-source programs that run in Unix/Linux to provide file and print services compatible with Windows-based clients.
Currently I’m looking into how to enable spin down of the hard drive when idle. Necessary? Supposed to make HD last longer. I just want to reduce power usage. The whole point of a Raspberry Pi in this scenario.
Maybe this page, “Spin Down and Manage Hard Drive Power on Raspberry Pi”, will help.
Feb 1, 2015 –
hdparm and sd-idle did not work. trying SDPARM.
/dev/sda1: LABEL=”USB B” UUID=”B23A8B373A8AF81D” TYPE=”ntfs” PARTUUID=”b75ac8d0-01″
sudo sdparm –flexible –command=stop /dev/sda1
/dev/sda1: ST325082 3AS
Feb 3, 2015 –
The spin down using sdparm is working fine.
July 5, 2018
My RaspberryPI died. Flash card had some issue. Spent a lot of time recreating my configuration again. The articles I link to on this post did not help much except for the one at “Retro Resolution“.
fstab added line: UUID=B23A8B373A8AF81D /mnt/PIHDD ntfs-3g defaults,nofail,noatime,auto,umask=0002,users/rw,uid=1000,gid=100 0 0
crontab has: /10 * * * * sdparm –command=stop /dev/sda1
- Raspberry Pi 2 (Canakit Ulitimate Starter Kit with WIFI)
- Old USB hub from Staples
- 3.5 inch 1 GB Hard drive
- HexStar-3 3.5in External Hard drive enclosure
I had a lot of grief getting it to work. Haven’t touched a Linux system in while.
Some articles of the many articles I found information on how to do this are in the links section below. Note that there isn’t one single approach to do this. And, it also depends on what OS your running on Raspberry PI. I’m running Raspbian which I installed via NOOBS; all included in the kit I purchased.
Other articles about this approach:
- Automatically Mounting an External USB Hard Disk on the Raspberry Pi
- How to use the Raspberry Pi as a Sonos NAS Server
- Raspberry PI as NAS for Sonos in summer house
- How I Turned Raspberry Pi 2 into an Audiophile Music Streamer
- Turn Your Raspberry Pi Into An NAS Box
- Home Baked NAS Using a Raspberry Pi and a Portable Hard Drive
- Technical Details
- Sonos unable to add folder due to Kapersky firewall
- Access virtual storage with UNC and mklink on Windows
- Sonos Wireless HIFI system setup
- Got my Raspberry PI’s wifi and keyboard configured
- Hierarchical Storage Management, from drive to cloud